Fjell R5 case and plate foam set kiko if you so choose

if you so choose

You will need to open your board up to tell which one it is

Stem: Modified Long Pole POM

we don't have an ISO version to offer

but cut to incorporate the posts and ridges in each design so that the foam sits flush to the bottom surface of the bar

Fjell R5 case and plate foam set kiko if you so chooseCase and plate foam for the Fjell R5 keyboard by Mekanisk 3mm plate foam 2mm or 3mm case foam we suggest using 2mm if using a hotswap PCB, and 3mm if using a solder PCB. Note: We chose to offer 3mm plate foam given the use of a WT60 D WeirdFlex as the stock solder build. However, if you are after a firmer typing feel, we're happy to cut the plate foam out of 4mm upon request. Just reach out to us before you order.